Corsair WARTHOG RS Airflow Mid-Tower Case – Olive

Ruggedised mid-tower built for extreme airflow | Military-inspired Olive Drab aesthetic | Three 360mm radiator mounting locations | Builder-friendly modular design | Pre-installed RS PWM fans

Quick Specs

• Dominate the build with ruggedised thick-steel construction and integrated carry handles that go wherever the battle takes you.
• Experience exceptional airflow through 3D Y-pattern front and top panels that increase airflow by 12.7% over standard flat cutouts.
• Cool your system with confidence — dual 360mm radiator support across three mounting locations: front, roof, and side.
• Build without limits using the InfiniRail™ Fan Mounting System for unmatched fan placement flexibility up to 200mm.
• Connect instantly via the front I/O panel with two USB 3.2 Gen 1 Type-A ports and one USB 3.2 Gen 2 Type-C port.

Built Like a Weapon. Cooled Like a Beast.

The Corsair WARTHOG RS Airflow Mid-Tower Case in Olive Drab is engineered for the serious PC builder who refuses to compromise on airflow, durability, or visual impact. Thick-steel construction, integrated carry handles, and slide-on side panels deliver a purposeful, ruggedised aesthetic that stands apart from every generic black box on the market. Whether you’re building a high-performance gaming rig or a powerhouse workstation, the WARTHOG RS gives you the structure and flexibility to do it right.

Airflow Engineered for Maximum Thermal Performance

Tired of cases that throttle your build before it even starts? The WARTHOG RS features 3D Y-pattern front and top panels that increase airflow by 12.7% compared to standard flat cutouts, creating a low-obstruction path for cool air to flood your components. Three pre-installed PWM fans — two RS200 200mm fans as front intakes and one RS120 fan as a rear exhaust — arrive ready for action. The InfiniRail™ Fan Mounting System lets you slide and position fans up to 200mm at the front and up to 140mm at the roof, giving you precise airflow control without fixed mounting constraints. With 360mm radiator support across the front, top, and side simultaneously, and the ability to mount up to 13x 120mm fans, keeping your system cool is never a compromise.

A Builder’s Case from the Ground Up

The WARTHOG RS is designed to make every stage of your build cleaner and faster. Reverse connector motherboard support is validated for ASUS BTF, MSI Project Zero, and GIGABYTE Project Stealth motherboards, with extensive cutouts and tie-down points to keep cables tidy even where they’re hidden. The RapidRoute 2.0 pegboard motherboard tray includes six cinching straps and two wire loom pairs, with the option to 3D print additional accessories for a truly custom cable management setup. A GPU Anti-sag Stabilisation Arm keeps your graphics card — up to 405mm in length — properly supported, while the flexible drive tray accommodates one 3.5″ HDD or two 2.5″ SSDs.

Rugged Style That Commands the Room

The Olive Drab finish isn’t just a colour — it’s a statement. The WARTHOG RS draws on military-equipment design language to create a case that looks as tough as it performs. Structurally integrated top-mounted carry handles let you move the fully built system with confidence. Slide-on side panels attach to fixed securing pegs rather than the tilt-and-clip mechanisms found on typical cases, improving both durability and ease of installation. Rear I/O lighting illuminates the back of the system, making cable connections straightforward even in a dimly lit battle station. Supports Mini-ITX, Micro-ATX, ATX, and E-ATX motherboards, giving you the freedom to build on your terms.

Features

• Ruggedised thick-steel construction with structurally integrated top-mounted carry handles for confident transport.
• 3D Y-pattern front and top airflow panels increase airflow by 12.7% over standard flat cutouts.
• Three pre-installed PWM fans: 2x RS200 200mm front intakes and 1x RS120 rear exhaust, with daisy-chainable 4-pin connectors and Zero RPM mode.
• InfiniRail™ Fan Mounting System supports fans up to 200mm at the front and up to 140mm at the roof for flexible, tool-friendly placement.
• Dual 360mm radiator support across three mounting locations — front, top, and side — with capacity for up to 13x 120mm fans simultaneously.
• Reverse connector motherboard support validated for ASUS BTF, MSI Project Zero, and GIGABYTE Project Stealth motherboards.
• RapidRoute 2.0 pegboard cable management with six cinching straps, two wire loom pairs, and 3D-printable accessory compatibility.
• Included GPU Anti-sag Stabilisation Arm supports graphics cards up to 405mm in length.
• Slide-on side panels with fixed securing pegs for improved durability and ease of installation.
• Front I/O: 2x USB 3.2 Gen 1 Type-A, 1x USB 3.2 Gen 2 Type-C, headphone/microphone combo, power, and reset.

Specifications

• Release Year: 2026
• Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATX
• Side Panel: Tempered Glass
• Included Fans: 3
• Max GPU Length: 405 mm
• Max CPU Cooler Height: 190 mm
• Radiator Support: Front: 360mm, 280mm, 240mm | Top: 360mm, 280mm, 240mm | Side: 360mm, 280mm, 240mm | Rear: 120mm, 140mm
• Front I/O: USB 3.2 Gen1 Type-A (x2), USB 3.2 Gen2 Type-C (x1), Headphone/Microphone (x1), Power, Reset
• RGB Lighting: No
• PSU Included: No
• Warranty: 2 Year
• Country of Origin: China
• Colour: Olive
• Warranty: 24 months
• Product Dimensions: 53.4 x 28.4 x 54.6 cm
• Product Weight: 12400g

What’s in the Box

• 1 x Corsair WARTHOG RS Airflow Mid-Tower Case – Olive Drab
• 2 x RS200 200mm PWM Fan
• 1 x RS120 120mm PWM Fan
• 1 x Case Accessory Box

Why Corsair

Corsair has spent decades engineering premium PC components trusted by builders and gamers the world over. From high-performance cooling to precision-crafted cases, every product is built to push the boundaries of what a PC can do. The WARTHOG RS is a confident expression of that commitment — rugged, capable, and ready to house your best build yet.