Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Syrup Brown

Carbon fibre reinforced PETG | Satin texture conceals layer lines | Superior impact and weather resistance | Easy to print

The Anycubic PETG-CF Satin Carbon Fiber Filament is designed for FDM makers who need more than standard PETG can offer. Carbon fibre reinforcement delivers greater rigidity and impact resistance than regular PETG, allowing printed parts to handle high pressure and heavy loads without snapping. The carbon fibre infusion also conceals layer lines and imparts a refined satin texture with a subtle luster — well suited to vehicle parts, sci-fi models, and functional prototypes. On top of its structural strengths, PETG-CF offers reliable water and weather resistance, making it a practical choice for parts used in demanding or outdoor-adjacent environments. At 1kg on a standard spool, this Syrup Brown variant gives you a full run of material ready to load and print.

Features

• Carbon fibre reinforcement provides superior rigidity and impact resistance over standard PETG
• Satin finish conceals layer lines for a cleaner, more refined surface appearance
• Water and weather resistant — suitable for functional and semi-outdoor applications
• Compatible with FDM 3D printers
• 1kg spool — Syrup Brown (#99403A)

Specifications

• Colour: Syrup Brown (#99403A)
• Printer Technology: FDM (Fused Deposition Modeling)
• Supporting Filaments: PETG-CF
• Dry Out Before Use: Required
• Drying Condition: Convection oven 60-65 °C, 6-8 h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Nozzle Material: Hardened steel
• Printing Temperature: 240-270 ℃
• Heated Bed Temperature: 65-70 ℃
• Recommended Printing Speed: 40-250 mm/s
• Cooling Time: 6 s
• Maximum Volume Speed (Flow Rate): 11 mm³/s
• Density: 1.32 g/cm³
• Melt Index: 14.1±1.6 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 221 ℃
• Vicat Softening Temperature: 74 ℃
• Heat Deflection Temperature (0.45MPa): 67 ℃
• Saturated Water Absorption Rate: 0.38%
• Young’s Modulus: 2550±100 Mpa
• Tensile Strength: 54±2 Mpa
• Elongation at Break: 12±1%
• Bending Modulus: 3100±150 Mpa
• Bending Strength: 88±2 MPa
• lzod lmpact Strength (X-Y): 60±4 kJ/m²
• Tensile Strength (Z): 37±3 MPa
• Filament Type: Functional & Aesthetic filaments
• Recommend to Print: Toys, functional decorative parts, and fandom
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported

What’s in the Box

• Anycubic PETG-CF Satin Carbon Fiber Filament 1kg – Syrup Brown x1