Antec CX MIRROR ARGB ATX Mid-Tower Gaming Chassis – Black

Mid-Tower | ATX · Micro-ATX · ITX | 270° Panoramic Glass | 7 ARGB Fans Pre-Installed | Dual 360mm Radiator Support

Quick Specs

• Show off your rig through a sweeping 270° panoramic tempered-glass view
• Cool hard with 7 pre-installed ARGB fans and bottom-to-top vertical airflow
• Sync your lighting instantly using the included 4-port ARGB controller
• Mount serious liquid cooling with dual 360mm radiator support
• Fit flagship hardware with up to 415mm GPU and 155mm cooler clearance

A Panoramic 270° View of Your Build

The Antec CX Mirror puts your hardware centre stage. Its wraparound tempered-glass front and side panels open up a 270° panoramic view, so every cable run, RGB accent and GPU backplate is on full display. It’s a chassis built for people who want their build seen, not hidden away in a metal box.

Vertical Cooling, Engineered for Heat

Rather than fighting gravity, the CX Mirror works with it. A vertical airflow design draws cool air in from the bottom and channels heat straight up and out, supporting up to 10 fans simultaneously for rapid heat extraction. The dual-chamber layout keeps the power supply in its own compartment with independent cooling, leaving the main chamber clear for airflow and a tidy build.

Seven ARGB Fans, Ready Out of the Box

There’s no need to buy fans separately to get the glow going. The CX Mirror ships with 7 pre-installed 120mm ARGB fans — three reverse-blade fans along the bottom, three more on the right side, and one at the rear. A 1-to-3 3-pin splitter cable and a 4-port ARGB controller are included too, so you can sync effects across the whole case from the moment you power on.

Built for High-End Water Cooling

Custom and AIO liquid cooling fit comfortably in this chassis. The CX Mirror supports 360mm radiators at both the top and bottom, plus a 240mm radiator on the right side. When pairing a right-side radiator and fans, keep the combined thickness under 70mm to avoid clashing with the graphics card. Magnetic dust filters on the top and bottom keep airflow clean without choking it.

Room for the Biggest GPUs

Lengthy modern graphics cards are no problem here. The CX Mirror clears GPUs up to 415mm long and CPU coolers up to 155mm tall, comfortably accommodating the latest RTX 50 Series cards and large air coolers alike. A removable HDD cage and up to 93.5mm of cable management space round out a layout designed to make even an ambitious build straightforward.

FEATURES:

• Panoramic 270° wraparound tempered-glass front and side panels
• Dual-chamber layout with a top-mounted PSU and independent cooling
• Vertical airflow design supporting up to 10 fans for rapid heat extraction
• 7 pre-installed ARGB fans: 3 x 120mm reverse (bottom), 3 x 120mm reverse (right), 1 x 120mm (rear)
• Included 1-to-3 3-pin splitter cable and 4-port ARGB controller
• Versatile water cooling with 360mm top, 360mm bottom and 240mm right-side radiator support
• Removable HDD cage supporting 1 x 3.5″ HDD and 2 x 2.5″ SSDs
• Magnetic dust filters on the top and bottom panels
• Front I/O with USB Type-C 3.2 Gen 1 (5Gbps), USB 3.0, USB 2.0, headphone/mic combo jack and LED control button
• Up to 93.5mm of cable management space

SPECIFICATIONS:

• Form Factor: Mid Tower
• Motherboard Support: ATX, Micro-ATX, ITX
• Materials: Steel + Tempered Glass
• Side Panel: Tempered Glass
• Front I/O: Power, LED Control Button, 1 x USB 2.0, 1 x USB 3.0, 1 x USB Type-C 3.2 Gen 1 (5Gbps), Headphone/Mic Combo Jack
• Expansion Slots: 7
• Drive Bays: 1 x 3.5″, 2 x 2.5″
• Fan Support:
  • Top: 3 x 120mm / 2 x 140mm
  • Right Side: 3 x 120mm
  • Bottom: 3 x 120mm
  • Rear: 1 x 120mm
• Included Fans: 7 x 120mm ARGB (3 reverse bottom, 3 reverse right, 1 rear)
• Radiator Support:
  • Top: 120 / 140 / 240 / 280 / 360mm
  • Right Side: 120 / 240mm
  • Bottom: 120 / 240 / 360mm
• Max GPU Length: ≤415mm
• Max CPU Cooler Height: ≤155mm
• Max PSU Length: ≤180mm (cable excluded)
• Dust Filters: Top / Bottom
• Product Dimensions: 43.8 x 27.5 x 40 cm (D x W x H)
• Product Weight: 5890 g

WHAT’S IN THE BOX:

• Antec CX Mirror ARGB Mid-Tower Gaming Chassis x1
• 1-To-3 3-Pin Splitter Cable x1
• 4-Port ARGB Controller x1

Why Antec?

Antec is a long-standing favourite among South African PC builders, with a reputation for chassis that balance striking design, smart cooling and real value. The CX Mirror ARGB mid-tower carries that pedigree forward, pairing a show-stopping panoramic glass design with serious airflow and water-cooling support. For local gamers who want a standout build without overspending, this ARGB gaming chassis is one of the most eye-catching ways to house your hardware.