Keychron Q3 Max 80% Full Assembled Knob Red Switch Hot-Swap Gateron Jupiter RGB Wireless Keyboard – Shell White

Premium aluminium construction | Tri-mode wireless freedom | Hot-swappable Gateron Jupiter Red switches | 4000mAh long-life battery | QMK/VIA programmable

Quick Specs

• Dominate your setup with a full aluminium body and gasket-mount construction for a premium, resonance-free typing experience.
• Connect seamlessly via tri-mode wireless — 2.4 GHz, Bluetooth 5.1, or USB Type-C wired — for total flexibility across every device.
• Swap switches in seconds with hot-swap PCB support, so you can tune your feel without soldering.
• Enjoy up to 180 hours of wireless use on a single charge from the 4000mAh rechargeable li-polymer battery.
• Command your media and volume with a dedicated control knob, south-facing RGB backlighting, and full QMK/VIA programmability.

The Custom Mechanical Keyboard Built for Those Who Refuse to Compromise

The Keychron Q3 Max is an 80% TKL wireless mechanical keyboard engineered for typists, creators, and discerning gamers who want a truly custom-grade experience without building from scratch. Housed in a precision-machined aluminium case with a multi-layer gasket-mount construction and an arsenal of acoustic foams, it delivers a typing feel that rivals boards costing far more — ready to use straight out of the box in Shell White.

A Sound and Feel You’ll Notice Immediately

Tired of hollow, rattly keyboards that undermine every keystroke? The Q3 Max addresses this from the ground up. Its gasket mount — with 16 gaskets absorbing shock between the plate and case — pairs with sound-absorbing foam, IXPE foam, PET film, and bottom case acoustic dampening to produce a deep, satisfying thock that transforms typing into something genuinely enjoyable. The PC plate and screw-in PCB stabilisers keep every key consistent and wobble-free, session after session.

Total Connectivity, Zero Compromise on Speed

The Q3 Max gives you three ways to connect: 2.4GHz wireless at 1000Hz polling rate for latency-free responsiveness, Bluetooth 5.1 at 90 Hz for seamless multi-device pairing, or USB Type-C wired when you want a direct, uninterrupted link. Switch between your gaming PC, work laptop, and tablet without missing a beat. The included Type-A 2.4 GHz receiver and extension adapter ensure a stable signal wherever your setup demands it, and N-Key Rollover across both wireless and wired modes means every simultaneous keypress is registered accurately.

Built to Be Yours — Fully Hot-Swappable and QMK/VIA Ready

Every aspect of the Q3 Max is designed to bend to your preferences. The hot-swap PCB accepts a wide range of switches — simply pull and replace the Gateron Jupiter Red switches using the included keycap and switch puller, no soldering required. Full QMK and VIA support means you can remap every key, create macros, and adjust lighting profiles through open-source software at any time. The dedicated control knob adds an analogue layer of control for volume, media, or any function you assign — a small addition that makes a significant daily difference.

Features

• Full aluminium case construction with multi-layer gasket mount for superior acoustic dampening and a premium typing feel.
• Tri-mode connectivity: 2.4GHz wireless (1000Hz), Bluetooth 5.1 (90 Hz), and USB Type-C wired — compatible with macOS, Windows, and Linux.
• Gateron Jupiter Red hot-swappable switches for smooth, linear keystrokes with easy switch replacement — no soldering needed.
• 4000mAh rechargeable li-polymer battery delivering up to 180 hours of use (backlight off) or up to 100 hours with RGB at lowest brightness.
• South-facing RGB LED backlighting for vivid, uniform illumination across PBT double-shot keycaps.
• QMK and VIA compatible for full key remapping, macro programming, and real-time layout customisation.
• N-Key Rollover (NKRO) on both wired and 2.4GHz wireless modes for accurate simultaneous keypress registration.
• Dedicated control knob for analogue media, volume, or custom function control.
• Screw-in PCB stabilisers for consistent, rattle-free keystrokes on larger keys.
• 80% TKL ANSI layout — retains function row and navigation cluster while saving valuable desk space.

Specifications

• Plate Material: PC
• Keyboard Size: TKL
• Connection: Tri-mode
• Switch Type: Gateron Jupiter Red
• Hot-Swappable Switches: Yes
• Stabilizer: Screw-in PCB stabilizer
• Backlight: South-facing RGB LED
• Keycap Material: PBT
• Battery Capacity: 4000mAh Rechargeable li-polymer battery
• Layout: ANSI
• Colour: Shell White
• Warranty: 12
• Product Dimensions: 36.5 x 13.7 x 3.2 cm
• Product Weight: 1770g

What’s in the Box

• Keychron Q3 Max Keyboard (Fully Assembled) – Shell White x1
• USB Type-C to Type-C Cable x1
• Type-A to USB Type-C Adapter x1
• Extension Adapter for Receiver x1
• Type-A 2.4 GHz Receiver x1
• Keycap & Switch Puller x1
• Screwdriver x1
• Hex Key x1

Why Keychron

Keychron has built its reputation by making enthusiast-grade mechanical keyboards accessible to everyone — from the weekend typist to the dedicated gaming community. Every Q Max board reflects that philosophy: premium materials, open-source programmability, and genuine customisability, so South African users can own a custom keyboard experience without the custom price tag.